Plumbing systems play an important role in your home’s overall foundation. A small leak may seem insignificant to you, but if left untreated, it can lead to mould growth, wood rot, or even structural damage. Therefore, you need to carry out the maintenance of the plumbing system frequently. Keep reading this blog for tips and tricks to take care of your plumbing system effectively.
1. Use a water pressure gauge
Water pressure gauge can be a great device to check leaks. You can check the pressure in the following way:
- Connect the water pressure gauge
Connect water pressure gauge to an outdoor spigot. Ensure that the pressure gauge comprises a washer which will make the connection better. In addition, ensure the connection is tight enough so there are no leaks. This will enable you to get accurate readings. Thus, you don’t need to worry about searching ‘how to pressure test water pipes for plumbing leaks?’ if you have a pressure gauge.
Carrying out all these methods with a DIY approach is not the optimum solution. Thus, if you are searching for a reliable and experienced drain cleaning specialist, contact us today!
- Turn off the water sources inside the house
Before carrying out the pressure test for plumbing, turn off all the water sources in your property. Doing this will help you keep other water sources away from interfering with the plumbing pressure test. Turn on the spigot for a few minutes and let the water flow. The flow of water will clear the air that can be present in the pipe.
- Take the first reading
After a few minutes, turn off the spigot and check the meter readings in the gauge for a pressure test for plumbing. You will observe that the pressure will be around 50-75 PSI (pounds per square inch). If you get a reading indicating lower pressure than this, there could be a problem with the water supply or a possible leak in the plumbing system.
- Monitor the gauge
Keep monitoring the gauge to see if there is a drop in the pressure during the pressure test for plumbing. If you notice a drop, there is a high chance of a leak in the plumbing system. To locate the leak turn off the main water supply and check every fixture and application one by one to check for leaks or damages. If no damage is found, there can be an underground leak. In such cases, you should get in touch with a professional plumbing service for a reliable plumbing pressure test.
2. Check your water bill
If your water bills keep increasing despite similar water usage, a leak may be the possible reason. Collect all your bills and check if there has been a steady or a drastic increase. If your water bill is in the same range every month, you need not worry. However, if the bill is more than what you expect, it might be time to call a plumber. A professional plumber can detect faulty and leaky pipes through effective plumbing pressure tests.
3. Check outdoor leaks
Connect your garden hose to the outdoor spigot for a plumbing pressure test. If the water leaks through the connection, replace the rubber hose gasket. Also, check your irrigation system at least once a year to ensure it functions smoothly.
Thus, to prevent harmful mould growth and expensive repairs, you should carry out the plumbing system maintenance. Finding and taking action to fix the leaks will also help you to take care of your water bills effectively. A great example of this is the plumbing pressure test.
When it comes to pressure tests for plumbing, finding the right plumber can be challenging. However, you can make this task much easier by contacting The Drain Surgeon. Our team of experienced plumbers has extensive knowledge in dealing with a wide range of plumbing systems, including how to pressure test water pipes for plumbing leaks. So, if you’re looking for a reliable plumbing service, don’t hesitate to contact us today. We’re here to help with all your plumbing needs.